Z-Wave Keypad Lock MK2 (Right-hand) offers the flexible versatility of a wireless and keyless locking solution with extra secure ANSI type mortese. The lock is integrated with the popular Z-Wave network protocol which can be integrated into automation building solutions. It features a Master pin code, low battery warning, emergency key override and many more safety features for your convenience.
Description
Master code
Have the ability to change the Master code
User codes
Program up to 10 different user codes
Remote code change
Integrated into the Z-Wave device the automation management software has the ability to change the code remotely without being at the lock
Z-Wave networking enabled
The wireless lock is a certified Z-Wave device which can be configured to any Z-Wave certified home automation or building automation system
Remote unlocking
From the software interface the door can be unlocked remotely
Illuminated keypad
The keypad does not have mechanical buttons which means your secret pin cannot be traced.
includes Mechanical key barrel for manual override
Low battery warning
The lock will emit a tone notifying the owner to replace the batteries; normal battery use is 12-16 months
BOX COMPONENTS
Electronic lock body front and rear with more secure ANSI mortise
User guide – including manual operation and Z-Wave device commands
Mechanical overkey keys – in case of power failure
Screw kit and installation instructions – all hardware, striker plate, phillips screws
Please note: for remote unlocking and wireless connection, this device requires Z-Wave home controller with AU/NZ RF 921.42MHz. Available functions may depend on the compatibility of your home controller software.
| Technical Specifications |
|
Product Name
|
Z-Wave Keypad Lock MK2 (Right-hand)
|
|
Powered by
|
4xAA High quality alkaline – 8,000 normal uses without using Z-Wave chip. The length of battery life will decrease when using the Z-Wave chip. Approximately 6-10 months of normal use
|
|
Operation Range
|
Up to 30m indoor
|
|
Door thickness
|
32-50 mm
|
|
Radio frequency
|
921.42 MHz (AU/NZ Z-Wave)
|
|
Fire rated
|
Cannot be used on afire door
|
|
Front/rear lock body
|
Die cast brushed stainless finish
|
| Tubular latch | Zinc alloy 60/70 variable backset |
|
Handle
|
Zinc alloy die cast stainless finish
|
|
Housing
|
Zinc alloy
|
|
Weight
|
2.5 kg
|
Additional information
| Weight | 4 kg |
|---|---|
| Dimensions | 12 × 13 × 14 cm |
Reviews
There are no reviews yet.